Testing Process
1
Turn on the automated AI-based analytical instrument, open the device door, and remove the lattice reagent cartridge tray for preparation.
2
Load the appropriate number of 200 µL micropipette tips according to the number of samples (one tip per sample).
3
Launch the operating software of the automated AI interpretation analyzer, connect to the instrument, and select the appropriate testing workflow based on the number of samples (1–3).
6
6
Attach a 10 µL pipette tip to the micropipettor (one tip per sample). Transfer 4 µL of the sample into well 1 of the lattice cartridge, and mix appropriately by pipetting up and down.
5
Place the lattice reagent onto the tray (up to a maximum of three at a time). Completely remove the seals from the lattice reagent.
4
4
Open the aluminum pouch of the lattice reagent and remove the required number of strips (one strip per sample).
7
Place the tray back into the automated AI interpretation analyzer and close the device door.
8
Click the “Start” option in the operating software.
9
Wait for the process to complete automatically.
12
The instrument will display the test results.
11
Wait for the process to complete automatically.
10
Confirm that the run time starts counting.
